Indlela yokwenza ukuvuza kwe-hydraulic hose?

Isizathu sibangeleithumbu lehydraulicukuvuza:

• I-Hose ngenxa yomthamo wokuzala akwanelanga kwaye iqhume, okanye kukho imingxuma yesanti, okanye ukhetho olungafanelekanga. Umzekelo, ukusetyenziswa non-ingcingo ephothiweyo umaleko yerubha ityhubhu njengocingo ephothiweyo umalekoithumbu lerabha, kuphela umaleko wentsimbi yentsimbi yokusetyenziswa kwemigangatho emithathu yomnatha ophothiweyo ukuze ube nobuchule, okanye uthenge umbhobho okumgangatho ophantsi.
• Xa ukufakwa kwe-flexible tube twist, ngokuhamba kwexesha, ityhubhu iya kuphulwa, izixhobo ziya kuba yioli.
• Ngokudibanisa phakathi kwe-hose kunye ne-joint, umsebenzi wezo zimbini awukho static, kumbhobho kunye nokudibanisa kulula ukuvelisa ukuvuza kweoli.
• Xa ubaleka, i-hose ayinayo indawo eyaneleyo yokwelula kwicala lobude kwaye itsalwe ngokuqinileyo.
• Umbhobho obalekayo neminye imibhobho okanye ukukhuhlana kwehardware eqinileyo.
• Umbhobho werabha wokugoba iradiyasi ayikho ngqiqweni, okanye kwinkqubo yokusebenza yombhobho uneradiyasi yokugoba engafanelekanga yobukho bemeko.

Indlela yokulawula:

• Khetha i-hose yerabha ngokuhambelana noxinzelelo lokusebenza.
• Ukuthengwa kweumbhobho werabha woxinzelelo oluphezului-buckle, thenga emva kovavanyo lokuqala umgangatho we-buckle, musa ioli efakwe kwi-host. Ezo zikumgangatho ophantsi kufuneka zitshintshwe.
• Xa ufaka i-hose yokuqinisa intambo, qaphela ukuba ungajikijeli i-hose. Xa umsebenzi wekhonkrithi, unokuzoba umgca wombala kwithumbu lokujonga, ujije umgca wombala we-hose ukusuka kumgca othe ngqo ukuya kumgca we-spiral, ukusuka kwi-joint ithande ukuvuza kweoli, kwaye ibangele ukuba i-hose iphuke.Kufuneka kubekho indawo yokwandiswa kwicala lobude. Musa ukuyitsala kakhulu. Ngenxa yokuba i-hose kwindima yoxinzelelo kunye nobushushu, ubude buya kutshintsha, ngokuqhelekileyo kwi-contraction, i-contraction malunga ne-3% yobude bombhobho.
• Ekujikeni, kufuneka kubekho ubude obaneleyo, i-radius yokugoba kufuneka ibe nkulu ngokwaneleyo, kwaye ekugobeni (kwidibaniso kunye nombhobho odibeneyo) kufuneka kubekho icandelo lombhobho othe tye, ubude bube ≥2d (d yi ngaphandle kwedayamitha yombhobho) , iradiyasi encinci yegophe ≥(9 ~ 10)
• Kungcono ukuba ungasebenzisi i-hose kwikona yasekunene, ngaphandle koko, phantsi kwemeko yoxinzelelo olutshintshanayo, ubude kunye ne-radius ye-curvature ye-hose bend iya kutshintsha kwaye ibangele ukuphuka kokukhathala, okukhokelela ekuvuzeni kweoli, ukusetyenziswa kwe-stainless stainless. i-hose yensimbi kufuneka ibe ingqwalasela ngakumbi.

• Ukuba inani lemibhobho yesixokelelwano engaphezulu, kufuneka ifakwe ngokulandelelanayo umbhobho wekliphu ukuze ujikelezwe, okanye uvule ngephepha lerabha. Kulumkele ukunxibelelana nombhobho okanye ukunxibelelana namanye amalungu oomatshini, ukuze uthintele impembelelo efanayo kunye nokungqubana okubangela umonakalo kunye nokuvuza kweoyile.